Sharp LC-90LE757K - Manual (Page 21)

19
Daily operation
Switching on/off
Turning on/off the power
Press a on the TV or >a on the remote control
unit.
Standby mode
Press a on the TV or >a on the remote control
unit when TV is on.
• The TV enters standby mode and the image on the
screen disappears.
• Weak electric power is still consumed even when the TV
is turned standby mode.
• To completely turn off the power to the TV, unplug the
AC cord from the AC outlet. However, do not unplug the
AC cord unless otherwise instructed.
NOTE
• If you are not going to use this TV for a long period of
time, be sure to remove the AC cord from the AC outlet.
Switching between digital, satellite
and analogue broadcasts
Watching digital
broadcasts Watching analogue
broadcasts
Watching satellite
broadcasts
NOTE
• If multiple satellite services are set, each time you press
the SAT button the channel switches as follows.
SAT1 SAT2
SAT3 SAT4
Changing channels
With :r/s With 0_9
Selecting an external video source
Once the connection is made, press b to display
the “INPUT” screen, and then press b or
a/b to
switch over to the appropriate external source with
;.
TV
INPUT
Switchable
CH list
NOTE
• You can also select an external video source from
“HOME” > “Input change”.
• Only HDMI inputs which are not set for “Input skip”
(Page 47) and properly connected inputs can be selected.
Watching TV