Sharp MX-C300P - Manual (Page 10)

8
This section explains how to install the software and configure settings so that the printer and scanner function of the
machine can be used with a Windows computer.
OPENING THE SOFTWARE SELECTION
SCREEN (FOR ALL SOFTWARE)
1 Insert the "Software CD-ROM" into your
computer's CD-ROM drive.
2 Click the [Start] button ( ), click
[Computer], and then double-click the
[CD-ROM] icon (
).
• In Windows XP/Server 2003, click the [start] button,
click [My Computer], and then double-click the
[CD-ROM] icon.
• In Windows 8/Server 2012, right-click in the startup
window (or swipe upward from the bottom edge), then
select [Taskbar]
→ [All Applications] → [Computer]
and then double-click [CD-ROM].
• In Windows 8.1, right-click the [Start] button on the
desktop, click [File Explorer] and then double-click the
[CD-ROM] icon.
3 Double-click the [Setup] icon ( ).
4 The "SOFTWARE LICENSE" window will
appear. Make sure that you understand
the contents of the license agreement
and then click the [Yes] button.
5 Read the message in the "Welcome"
window and then click the [Next] button.
6 The software selection screen appears.
Before installing the software, be sure to click the
[Display Readme] button and view the detailed
information on the software.
For the steps that follow, see the appropriate page below
for the software that you are installing.
2
SETUP IN A WINDOWS
ENVIRONMENT
• In Windows 7/8/8.1/Server 2012, if a message screen
appears asking you for confirmation, click [Yes].
• In Windows Vista/Server 2008, if a message screen
appears asking you for confirmation, click [Allow].
You can show the "SOFTWARE LICENSE" in a
different language by selecting the desired language
from the language menu. To install the software in the
selected language, continue the installation with that
language selected.
INSTALLING THE PRINTER DRIVER / PC-FAX DRIVER
• WHEN THE MACHINE IS CONNECTED TO A NETWORK* 1
- Standard installation: page 10
- Advanced installation: page 12
- Installation by specifying the machine's address: page 14
- Printing using the IPP function and the SSL
function* 2 : page 17
• WHEN THE MACHINE WILL BE CONNECTED WITH A
USB CABLE: page 19
• USING THE MACHINE AS A SHARED PRINTER: page 23
INSTALLING THE PRINTER STATUS MONITOR: page 27
INSTALLING THE SCANNER DRIVER: page 28
* 1 If the machine is being used on an IPv6 network, see
"Installation by specifying the machine's address" (page 14).
* 2 Depending on the models, this function may not be available.
The button and screen vary depending on the models.
If you use the printer model, the [Printer Status Monitor]
button is displayed instead of the [Utility software] button.