Sharp MX-2314N - Manual (Page 8)

8
TURNING THE POWER ON AND OFF
This machine has two power switches. The main power switch is at the bottom left after the front cover is opened. The other power switch is the [POWER] key ( ) on the operation panel.
Turning on the power
(1) Switch the main power switch to the “ ” position.
(2) Press the [POWER] key ( ) to turn on the power.
Turning off the power
(1) Press the [POWER] key ( ) to turn off the power.
(2) Switch the main power switch to the “ ” position.
• If the main power indicator is blinking, press the [POWER] key ( ) after it becomes steadily lit.
• When turning off the power, make sure that the indicator lights on the operation panel turn off as well.
• In the event of a power failure or other reason that causes the machine to suddenly turn off, turn back on the power of
the machine and then proceed to turn off the machine following the correct procedures.
Switching off the main power switch or removing the power cord from the outlet while any of the indicators are lit or
blinking may damage the hard drive and cause data to be lost.
• Switch off both the [POWER] key ( ) and the main power switch and unplug the power cord if you suspect a machine
failure, if there is a bad thunderstorm nearby, or when you are moving the machine.
When using the fax or Internet fax function, always keep the main power switch in the “on” position.
� Restarting the machine
In order for some settings to take effect, the machine must be restarted.
If a message in the touch panel prompts you to restart the machine, press the [POWER] key (
) to turn off the power and then press the key again to turn the power back on.
In some states of the machine, pressing the [POWER] key ( ) to restart will not make the settings take effect. In this case, use the main power switch to switch the power off and then on.
Main power
switch
Main power
indicator
[POWER] key
When the main power
switch is switched on, the
main power indicator on the
operation panel lights up.