Sharp LC-60UQ10KN - Manual (Page 37)

35
Picture settings
Go to “TV Menu” > “Setup” > “Picture”.
Setup
AV mode
Picture
Clear Picture Processing
CH list
:Back :Enter
Menu
Backlight
OPC
[Off]
Picture
AV mode
“AV mode” gives you several viewing options to
choose from to best match the system environment,
which can vary due to factors like room-brightness,
type of programme watched or the type of image
input from external equipment.
Press a/b to select the desired mode, and
then press ;.
• You can also switch the mode on the “Picture” and
“Audio” menu screen by pressing #.
Item
AUTO
The TV automatically sets the
appropriate selection from the “AV
mode” menu depending on the
lighting conditions and the type of
programme watched.
STANDARD
For a highly defined image in a
normally bright room.
MOVIE
For viewing a movie in a darkened
room.
MOVIE THX
Adjust the picture to room
illumination or ambient brightness.
GAME (Standard/
High motion)
For playing of video games.
PC* 1 For PC.
USER
Allows you to customise settings as
desired. You can set the mode for
each input source.
x.v.Colour* 2
Produce realistic colour on the TV
screen unlike any other signal.
DYNAMIC
For a clear-cut image emphasising
high contrast for sports viewing.
DYNAMIC (Fixed)
For a clear-cut image emphasising
high contrast for sports viewing
(the “Picture” and “Audio” settings
cannot be adjusted).
3D
Refer to page 74 for details.
GAME (3D)
I “PC” is available only when selecting “HDMI 1”, “HDMI 2”,
“HDMI 3”, “HDMI 4” or “PC” from the “INPUT” menu.
J “x.v.Colour” is available only when accepting an
“x.v.Colour” signal through an HDMI terminal.
NOTE
• If you select “AUTO”, some selections in the “AV mode”
menu may not be automatically set.
• “Game type” mode can be set. Refer to “Game type” on
page 37.
Picture
Quattron Pro Drive
Configures Quattron Pro Drive Mode settings:
Item
Mode 1 Enhance the picture brightness.
Mode 2 Enhance the sense of definition
Off Expand the view angle.
NOTE
• When Quattron Pro Drive Mode is set to "Mode 1" or
"Mode 2", the following modes do not work:
− Motion enhancement (ActiveMotion 800 and 200
Hz). If you want to use this mode, set Quattron Pro
Drive to "Off".
• Quattron Pro Drive is not available when:
− The A/M800 or 200 Hz mode is selected.
− 3D mode is On.
Picture
THX Room Mode Setting
Adjust the picture to room illumination or ambient
brightness. This function is available only when AV
MODE is set to "MOVIE THX".
Bright room: Select this item for a bright room.
Dark room: Select this item for a dark room.
Picture
Clear Picture Processing
Processes noise included in broadcast signals to
improve picture quality.
Item
High
Improves picture quality through Clear
Picture Processing at a level above
“Middle”.
Middle
Off
Turn OFF the function for improving picture
quality through Clear Picture Processing.
Basic adjustment