Brother 1270N User Manual

Page 108

Advertising
background image

CHAPTER 4 DISASSEMBLY AND RE-ASSEMBLY

4-35

(6) Turn the main frame upside down.

(7) Remove the two M3x6 Taptite screws and release the solenoid harness from the hook and

remove the cassette guide L/F.

Fig. 4-61

(8) Remove the M3x4 screw and the tape on the solenoid harness and remove the solenoid

ASSY.

Fig. 4-62

!

CAUTION:

When removing the solenoid, the solenoid rod and spring may come off. Be careful not to lose
them. (Refer to the figure above.)

Taptite, cup M3x6

Cassette guide L/F

Screw, bind M3x4

Solenoid ASSY

Main frame

Tape

Rod

Step (7)

Spring

Advertising
See also other documents in the category Brother Printers: