Brother 1270N - Manual (Page 21)

CHAPTER 1 GENERAL
1-9
(2) Other paper specifications
<Paper Cassette>
Cut sheet
Basis weight 64 to 105 g/m 2 (17 to 28 lb.)
Caliper 0.08 to 0.13 mm (0.003 to 0.005 in.)
Moisture content 4% to 6% by weight
<Manual Feed Slot>
Cut sheet Envelope
Basis weight 64 to 158 g/m 2 (17 to 43 lb.) 75 to 90 g/m 2 (20 to 24 lb.)
single thickness
Caliper 0.08 to 0.2 mm (0.003 to 0.008 in.) 0.084 to 0.14 mm (0.003 to 0.005 in.)
single thickness
Moisture content 4% to 6% by weight 4% to 6% by weight
(3) Recommended paper
•
Letter: Xerox 4200 (75 g/m 2 )
•
A4: Xerox 80 Premier Paper (80 g/m 2 )
•
Label: Avery laser label or equivalent
•
Transparency: 3M CG3300 or equivalent
!
CAUTION:
When you are choosing print media, be sure to follow the information given below to prevent
any paper jams, print quality problems or printer damage;
•
It is recommended to use long-grained paper for the best print quality. If short-grained
paper is being used, it might be the cause of paper jams.
•
Use neutral paper. Do not use acid paper to avoid any damage to the drum unit.
•
Avoid using coated paper such as vinyl coated paper.
•
Avoid using preprinted or highly textured paper.
•
It is recommended to use labels or transparencies which are designed for use in laser
printers.
•
Avoid feeding labels with the carrier sheet exposed, or the printer will be damaged.
•
Before loading paper with holes such as organizer sheets, be sure to fan the stack well.
•
Do not use organizer sheets that are stuck together. The glue that is used might caused
damaged to the printer.
•
When printing on the back of pre-printed paper, if the paper is curled, be sure to straighten
the paper as much as possible.
•
Different types of paper should not be loaded at the same time in the paper cassette to
avoid any paper jams or misfeeds.