Neff B132 - Manual (Page 38)

38
Electronic clock
Automatic ON and OFF:
❑ Baking or roasting begins for the set
duration at a later time which you
selected.
1. Select the heating system, and set the
required oven temperature.
2. Press the g button and set the length
of the desired cycle (see the example in
the illustration at right, showing 1 hour
and 30 minutes).
3. Press the h button and set the end of
the cycle (the example in the illustration
shows 12.30 hrs.).
After the setting is completed, the
display shows the time of day and
indicates
&
.
❑ The oven switches on automatically at
the preselected time and the
w
symbol
illuminates.
❑ The settings can be corrected at any
time.
❑ When the pre-set end of the timer cycle
is reached, a signal sounds and the
oven is automatically switched OFF.
To turn off the signal, briefly press the
h
button.
4. Turn the function selector and the
temperature selector switch to the
0 position.
5. The
&
symbol blinks.
Important: It must be switched OFF by
pressing the
E
button.
Setting the length of timer cycle
Setting the end of timer cycle
❑ The current settings can always be
checked by pressing the appropriate
function button.
❑ To cancel a setting before the timer
cycle has elapsed:
Press the
g
button and reset the time
in the display to 0.00.
❑ The acoustic signal switches off
automatically after 2 minutes.
Please note:
❑ The automatic timer is ideal for dishes
that require little attention during
cooking.
❑ Both the alarm and the automatic timer
may be programmed up to 24 hours in
advance.