Cleaning the appliance, M caution, Interior fittings – Neff K4336X8GB User Manual

Page 13: Take out glass shelves, Taking out pull-out container, Condensation channel, Taking out vegetable container with cover, Take out shelves in the door, Taking out the bottle holder, Ventilation opening

Advertising
background image

en

13

Cleaning the appliance

ã=

Caution

Do not use abrasive, chloride or acidic

cleaning agents or solvents.

Do not use scouring or abrasive

sponges. The metallic surfaces could

corrode.

Never clean shelves and containers in

the dishwasher. The parts may

become deformed!

Proceed as follows:
1. Before cleaning: Switch the appliance

off.

2. Pull out the mains plug or switch off

the fuse.

3. Take out the frozen food and store in

a cool location.

4. Clean the appliance with a soft cloth,

lukewarm water and a little pH neutral

washing-up liquid. The rinsing water

must not run into the light.

5. Wipe the door seal with clear water

only and then wipe dry thoroughly.

6. Rinsing water must not run through

the drainage hole into the evaporation

area.

7. After cleaning reconnect and switch

the appliance back on.

8. Put the frozen food back in the freezer

compartment.

Interior fittings

All variable parts of the appliance

can be taken out for cleaning.

Take out glass shelves
Fig.

4

Lift the glass shelves, pull forwards,

lower and swivel out to the side.

Taking out pull-out container
Fig.

7

Lift the container and pull out.

Condensation channel
Fig.

+

To clean the condensation channel, take

out the pull-out container. Fig.

1/4

Regularly clean the condensation

channel and drainage hole with a cotton

bud or similar implement to ensure that

the condensation can drain.

Taking out vegetable container with

cover
Fig.

8

Lift vegetable container and take out

forwards.

Take out shelves in the door
Fig.

6

Lift shelves upwards and take out.

Taking out the bottle holder
Fig.

9

Lift bottle holder at the rear and remove

from the door shelf.

Ventilation opening
Fig.

,

The ventilation grille in the base can be

removed for cleaning. To do this,

depress the clips in the ventilation

openings and simultaneously remove

the ventilation grille forwards.

Advertising