Bradley Smoker 1100 - Manual (Page 5)

5
Installation Instructions Aerada 1100 Series High Arc Faucet
Bradley Corporation • 215-1558 Rev. A; EN 07-202 3/8/07
Cleaning the Aerator
Cleaning the Inline Filter
Cleaning and Maintenance
1. Shut off the hot and cold water supply.
2. Disconnect the hot and cold water lines from the
supply lines.
3. Remove the filters from the connections and clean
them thoroughly of any debris.
4. Reinstall filters and connect the hot and cold water
lines to the supply pipes. Use Teflon tape on the
threads to ensure a leak-free joint. Tighten
connections securely.
5. Turn water supply on.
1. Shut off the hot and cold water supply.
2. Remove the aerator with the spanner wrench and
thoroughly clean out any debris.
3. Reinstall the aerator using the spanner wrench
supplied with the faucet.
4. Turn the water supply on.
It is not necessary to shut off water supply to
clean the sink.
To shut off water flow, cover the infrared window
with your hand (as shown) for 5 seconds.
Remove your hand. Water flow will be halted for
90 seconds.
FILTER
AERATOR