Parts included preparation – Bosch NIT8653UC User Manual
Page 5
5
Additional materials may be necessary for installation in solid surface countertops.
Contact the countertop manufacturer.
1.
Hold down brackets
2.
Clamping screws, #10Ć32 x 2 1/2" (63,8 mm) (4)
3.
Sheet metal screws, #8 x 3/8" (9,5 mm) (4)
4.
Washers (4)
5.
Heat shield
Setback Distance
Flat Area
Flat Area
Flat Area
After preparing cutout, remove shavings as they can affect the function of electrical
components.
WARNING: To reduce the risk of ignition combustible materials surround the
installed cooktop are not permitted.
Solid surface countertops often require special installations. For example, heat
reflective tape and rounded corners may be necessary. Contact the countertop
manufacturer for instructions specific to your countertop.
Note:
Parts included
Preparation
Countertop requirements