Operation, Using the dryer – Bosch WTMC 652SUC User Manual

Page 22

Advertising
background image

22

Operation

Using the dryer

1. Open the door.

2. Check lint filter.

The filter should be cleaned

after and before every drying

process. Cleaning the filter

reduces the drying time and

saves energy.

3. Rotate program selector to the

desired program.

Select the program which

corresponds to the laundry in

the dryer from the program

selection table (see page 21).

The dryer light turns on inside

the drum.

i

The estimated remaining time

will be indicated.

i

Lint filter indicator flashes for

5 seconds - Check lint filter"!

4. Select Additional Options" on

the display.

More detailed information on

the individual additional options

can be found on page 19.

5. If required, select Option" by

pressing the button.

The Options" are explained on

page 20.

i

The estimated remaining time

will be updated.

6. Place laundry in the empty

drum. Put each piece of laundry

into the machine separately.
For best results the laundry to

be dried must be sorted

according to type of laundry

and desired degree of drying.

For further information see

page 17.

i

Observe drying symbols of the

laundry manufacturer.

If drying woolen clothing and

shoes, see the information on

page 78 and page 23.

Ensure that there is only laundry in

the drum. Check that all items are

completely in the drum.

7. Close the door.

The Start/Stop" indicator light

starts flashing.

i

If you have chosen a time

program don't forget to select

a time. Otherwise the

Start/Stop" indicator light will

not flash and the dryer will not

start.

i

If the door has not been closed

properly, the dryer will not start.

8. Press the Start/Stop" button.

The Start/Stop" indicator light

illuminates.

i

The program starts with an

acoustic signal (if set).

If an automatic program has been

selected, the indicator lights

indicate the progress of the

program sequence.

i

At the end of the program

sequence damp dry an

acoustic signal is emitted

(if set).

i

At program end an acoustic

signal is emitted (if set) and the

LED wrinkle block" illuminates.

i

When the drying process is

complete (program or selected

time program ended), the drum

rotates at specific intervals.

This prevent the laundry from

creasing (see Extended

Wrinkle Block", page 20).

Advertising