Philips Sonicare FlexCare Cepillo dental sónico recargable - Manual (Page 15)

The Quadpacer on this model has been activated.
To deactivate or reactivate the Quadpacer:
1 Place the handle with a brush head attached on
the plugged-in charger or sanitiser
2 To deactivate the Quadpacer: press and hold
the Personalised Brushing button for
5 seconds. You hear 1 beep to indicate that
the Quadpacer has been deactivated.
, To reactivate the Quadpacer: press and hold
the Personalised Brushing button for 5 seconds
until you hear 2 beeps. This indicates that the
Quadpacer is active again.
Note: The Quadpacer cannot be deactivated on the
pre-programmed Go Care and Max Care brushing
routines.
Cord wrap on deluxe charger
(specific types only)
If your model includes the deluxe charger cover and
base, the travel charger is pre-installed inside the
cover. If you want to shorten the mains cord, you
can store excess cord in the cord-wrap feature built
into the charger base.
1 To separate the charger cover from the
charger base, press the two grey snap bars on
the charger base and pull the white charger
cover upwards.
2 Wrap excess cord around the grey charger
base as shown in the picture. Be sure to wrap
the cord on the inside of the two snap levers.
ENGLISH 15