Philips Sonicare FlexCare Cepillo dental sónico recargable - Manual (Page 19)

Sanitiser (specific types only)
Do not clean the sanitiser when the UV light bulb
is hot.
For optimal effectiveness, it is recommended to
clean the sanitiser weekly.
1 Unplug the sanitiser.
2 Slightly lift the drip tray and pull it out.
Rinse the drip tray and wipe it clean with
a damp cloth.
3 Clean all reflector surfaces with a damp cloth.
4 Remove the protective screen in front of the
UV light bulb.
To remove the screen, gently lift it up (1) and pull it
out (2).
5 Remove the UV light bulb.
To remove the light bulb, grasp it and pull it out of
the metal clasp.
6 Clean the protective screen and the UV light
bulb with a damp cloth.
7 Reinsert the UV light bulb.
To reinsert the light bulb, align the bottom of the
light bulb with the metal clasp and push the bulb
into the clasp.
8 Reinsert the protective screen.
To reinsert the screen, align the pegs on the screen
with the slots on the reflective surface near the UV
light bulb. Then insert the pegs into the slots and
slide down the screen to secure it in the sanitiser.
ENGLISH 19