Philips Lumea Sistema de eliminación de vello IPL User Manual

Page 13

Advertising
background image

Recommended light intensities (1-5)

In the table below, ‘x’means that the appliance is not suitable for you.

Skin colour &

characteristics:

White

(always

sunburn,

no

tanning)

Beige

(easy

sunburn,

minimal

tanning)

Light

brown

(sometimes

sunburn,

good

tanning)

Mid brown

(rarely

sunburn,

fast and

good

tanning)

Dark

brown

(rarely

sunburn,

very good

tanning)

Black

(rarely

to never

sunburn,

very dark

tanning)

hair colour: dark blond/

light brown/brown/

dark brown/black

4/5

4/5

4/5

3/4

1/2/3

x

hair colour: white/

grey/red/light blond

x

x

x

x

x

x

Important:

To check whether Philips Lumea for men is suitable for you, see section ‘For

whom is Philips Lumea for men not suitable?’.

If your skin has been exposed to natural sunlight or an artificial tanning

method, it may be darker than during the previous treatment. Check the

table above to determine which settings are suitable for your skin colour.
Tanning advice

Sun exposure before treatment

- Wait at least 48 hours after sunbathing before you use the appliance.

Sunbathing can cause skin to darken (tan) and/or can cause sunburn

(reddening of the skin).

- After these 48 hours, check the skin for any remaining sunburn. Do not

use Philips Lumea for men as long as sunburn persists.

- When the sunburn has disappeared, perform a skin test (see chapter

‘Using the appliance’, section ‘First use and skin test’) on the area to be

treated to determine the appropriate light intensity.

- If your skin is tanned, perform a skin test (see chapter ‘Using the

appliance’, section ‘First use and skin test’) on the area to be treated and

select the appropriate light intensity. A failure to do so causes a risk of

developing skin reactions after treatment with Philips Lumea for men.

Sun exposure after treatment

- Wait at least 24 hours after treatment before you expose treated areas to

the sun. Even after 24 hours, make sure that the treated skin does not show

any redness from the treatment anymore before you expose it to the sun.

- Cover treated areas when you go out in the sun or use a sun block

(SPF 30+) in the two weeks after the treatment.

- Exposing treated areas to the sun immediately after treatment without

protection can increase the risk of adverse side effects and skin reactions. See

chapter ‘Using the appliance’, section ‘Possible side effects and skin reactions’.

Tanning with artificial light

- Follow the instructions in ‘Sun exposure before treatment’ and ‘Sun

exposure after treatment’ above.

Tanning with creams

- If you have used artificial tanning lotion, wait until the artificial tan has

fully disappeared before you use Philips Lumea for men.

English

13

Advertising