Philips Lumea Sistema de eliminación de vello IPL - Manual (Page 19)

Note: A contaminated light exit window can look like this picture. Make sure
you clean the appliance before and after each use and, if necessary, also
during the treatment according to the instructions in this section.
4 If necessary, clean the outside of the appliance with the dry soft cloth
supplied with the appliance.
Tip: If it is no longer possible to clean the edges of the attachment with the
cleaning cloth supplied, use a cotton bud instead. Make sure that no fluff of
fibres stay behind on the attachment or on the light exit window.
Storage
1 Switch off the appliance, unplug it and let it cool down.
2 Clean the appliance before you store it.
3 Put the appliance in the pouch supplied.
4 Store the appliance in a dry place at a temperature between 0°C
and 60°C.
Replacement
If you have to replace a part or want to purchase an additional part, go to
your Philips dealer or visit www.philips.com/shop.
If you have problems obtaining the parts, please contact the Philips
Consumer Care Centre in your country.
Replacement parts
The following replacement parts are available:
- Adapter
- Pouch
- Body attachment
Environment
- Do not throw away the appliance with the normal household waste
at the end of its life, but hand it in at an official collection point for
recycling. By doing this, you help to preserve the environment.
- The built-in rechargeable batteries contain substances that may pollute
the environment. Always remove the batteries before you discard and
hand in the appliance at an official collection point. Dispose of the
batteries at an official collection point for batteries. If you have trouble
removing the batteries, you can also take the appliance to a Philips
service centre. The staff of this centre will remove the batteries for you
and will dispose of them in an environmentally safe way.
English 19