Corded use, Epilating with the leg skin cooler – Philips Satinelle Ice Premium Depiladora User Manual

Page 10

Advertising
background image

disappears. As you use the appliance more often, your skin gets used

to epilation, skin irritation decreases and regrowth becomes thinner

and softer. If the irritation has not disappeared within three days, we

advise you to consult a doctor.

- We advise you to epilate before you go to bed at night, as this allows

any skin irritation that may develop to diminish overnight.
corded use

You can also use the appliance from the mains. However, to avoid

damage to the batteries, only use the appliance from the mains when

the batteries are empty.

1

To run the appliance from the mains when the batteries are empty,

switch off the appliance and connect it to the mains. Wait a few

seconds before you switch on the appliance.
Epilating with the leg skin cooler

Only use the leg skin cooler to epilate your legs.
Make sure your skin is clean, entirely dry and free from grease. Do not

use any cream before you start to epilate.

1

Slide the insulating sleeve onto the skin cooler. (Fig. 3)

The insulating sleeve prevents an unpleasant sensation of coldness in your

hand while you use the appliance. It also keeps the skin cooler cold as

long as possible.

Sometimes the pivoting cooling head freezes onto the skin cooler and

does not move when you take the skin cooler from the freezer. The

pivoting cooling head starts to pivot again after you have passed it over

your leg a few times.

2

Snap the appliance onto the skin cooler (Fig. 4).

3

Select the desired speed to switch on the appliance (Fig. 5).

Select speed I for areas with little hair growth and for areas where bones

are located directly beneath the skin, such as knees and ankles.

Select speed II for larger areas with stronger hair growth.

EnglisH

10

Advertising