Philips SatinSoft Depiladora - Manual (Page 10)

Cleaning and maintenance
Never use scouring pads, abrasive cleaning agents or aggressive liquids
such as petrol or acetone to clean the appliance.
Always keep the appliance and the adapter dry. Never rinse them under
the tap or immerse them in water.
If necessary, clean the adapter with the cleaning brush or a dry cloth.
Cleaning the appliance
1 Switch off and unplug the appliance.
2 Pull the attachment off the epilating head.
3 Push the epilating head to the right (1) and remove it from the
appliance (2).
Note: Never try to detach the epilating discs from the epilating head.
4 Remove loose hairs with the cleaning brush.
5 Rinse all parts (except the appliance and the adapter) under the
tap and shake excess water off.
Note: Make sure all parts are completely dry before you reassemble
the appliance.
Cleaning the exfoliation brush
1 Rinse the exfoliation brush under the tap, if necessary with some
soap or shower gel, and let it dry before you store it.
replacement
If you need to replace a part or want to purchase an additional part, go
to your Philips dealer or visit www.philips.com/shop. If you have problems
obtaining the parts, please contact the Philips Consumer Care Centre
in your country.
EnglisH
10