Philips SatinSoft Depiladora - Manual (Page 8)

using the appliance
Note: This appliance cannot be used cordlessly. You can only use it in
combination with the adapter supplied.
Epilating tips
- Epilation is easier just after taking a bath or shower. Make sure your skin
is completely dry when you start epilating.
- Make sure your skin is clean, entirely dry and free from grease. Do not
apply any cream to your skin before you start to epilate.
- We advise you to epilate before you go to bed at night, as skin
irritation usually disappears overnight.
- Epilation is easier and more comfortable when the hairs have a length
of 3-4mm. If the hairs are longer, we recommend that you shave first
and epilate the shorter regrowing hairs after 1 or 2 weeks.
Epilating
Note: If you are new to epilation, start epilating with the double wavy massage
attachment to minimise the pulling sensation of epilation. This attachment is
only intended for epilating the legs.
Note: To epilate the underarms or bikini line, use the sensitive area cap that
reduces the number of active epilating discs.
1 Insert the small plug into the socket in the bottom of the appliance
(1) and put the adapter in the wall socket (2).
2 Put the attachment on the epilating head.
3 Press the on/off button once to switch on the appliance.
, The appliance starts to operate at speed II, which is the most
efficient speed for epilating.
Note: If you want to use speed I, press the on/off button a second time.
Speed I is suitable for areas with little hair growth, for hard-to-reach areas
and for areas where bones are located directly beneath the skin, such as
knees and ankles.
4 Stretch the skin with your free hand to make the hairs stand upright.
Place the epilating head at an angle of 90° onto the skin with the
on/off button pointing in the direction in which you are going to
move the appliance.
EnglisH
8