Philips Click&Style afeitado y arreglo personal - Manual (Page 16)

4 Use the cleaning brush supplied to clean the inside of the body
groomer attachment and rinse the inside under the tap (Fig. 31).
5 Rinse the body groomer foil under the tap.
6 Shake off excess water and place the body groomer foil back into
the attachment.
cleaning the beard styler attachment
1 Switch off the appliance.
2 Pull the comb off the beard styler attachment (Fig. 16).
3 Open the beard styler attachment (Fig. 32).
Dispose of the hairs in the garbage bin.
4 Rinse the beard styler attachment and the comb separately under a
hot tap for some time (Fig. 33).
5 Lubricate the trimmer teeth with a drop of sewing machine oil
every six months.
Storage
Note: Make sure the appliance and the attachments are dry before you store
them.
1 Put the protection cap on the shaver after use to prevent damage
and to avoid dirt accumulation in the shaving heads (Fig. 34).
Note YS534: Store the shaver and all parts in the pouch.
2 Place a comb on the body groomer attachment for travelling or
storage.
replacement
replacing the shaving heads
For maximum shaving performance, we advise you to replace the shaving
heads every two years. Replace damaged shaving heads right away.
Only replace the shaving heads with original RQ32 Philips shaving heads.
See also chapter ‘Ordering accessories’.
EngliSh 16