Philips Click&Style afeitado y arreglo personal - Manual (Page 17)

1 Follow steps 1-4 from chapter ‘Cleaning and maintenance’ under
‘Cleaning the shaving attachment’.
2 Remove the shaving heads and place new ones in the shaving unit.
Make sure the two wings of the shaving heads fit exactly into the
recesses.
3 Place the retaining rings back onto the shaving unit (1). To reattach
the retaining rings, turn it against the direction of the arrows
indicated in and on the retaining ring (2) (Fig. 29).
Make sure the retaining rings are fixed properly. The four wings of the
retaining ring have to be located exactly under the recesses of the shaving
head holder.
4 Reattach the shaving unit to the shaving attachment.
If the shaving unit cannot be reattached smoothly, check if you have
positioned the shaving heads properly and if the retaining rings are fixed
properly.
replacing the body groomer foil
For a maximum grooming performance, we advise you to replace the
body groomer foil every year. Replace the foil with TT2000 Philips
bodygroomer foil.
1 Pull the body groomer foil off the attachment (Fig. 30).
2 Place the new foil onto the attachment and snap it into place.
ordering accessories
To buy accessories or spare parts, visit www.shop.philips.com/
service or go to your Philips dealer. You can also contact the Philips
Consumer Care Centre in your country (see the worldwide guarantee
leaflet for contact details).
The following accessories are available:
- RQ32 Philips shaving heads
- TT2000 Philips bodygroomer foil
- YS511 Philips beard styler attachment
EngliSh 17