Philips SatinPerfect Depiladora - Manual (Page 12)

Problem Possible
cause
Solution
During use,
the epilator
becomes hot
and suddenly
stops
operating.
Then the
speed lights
and the
charging light
flash red for
30 seconds.
The overheat
protection
has been
activated.
The epilator is equipped with
integrated overheat protection, which
prevents the epilator from becoming
too hot. If the overheat protection is
activated, the appliance switches off
automatically. Then the speed lights and
the charging light flash red for 30
seconds. To reset the overheat
protection, let the appliance cool down
and then switch it on again. To avoid
overheating of the epilator, do not
press the epilator too hard onto your
skin.
The precision
epilator does
not work.
The
disposable
batteries are
empty or
have been
inserted
incorrectly.
Replace the batteries or insert them
correctly (see the user manual).
The precision
epilator is
operating,
but its
performance
is poor.
After 40
minutes, the
disposable
batteries are
almost empty
and no longer
have enough
power to
guarantee
good
performance.
Insert new batteries (see the user
manual). Only use disposable non-
rechargeable AA 1.5V alkaline
batteries.
EnglIsH 12