BT On-Air DECTf@x Plus F@x machine and digital telephone system - Manual (Page 66)

Additional features
65
Putting the privileged access function into
service
1 Press OK/Menu then 4 then 8 and Start .
2 Choose WITH using the
▲ and ▼ buttons.
3 Press OK/Menu to confirm,
• When the privileged access function is in
service, the TEL blinks.
Privileged calls
Only those privileged callers having your
privileged access code will be able to call you.
To do so, they should proceed as follows:
1 Dial your number.
2 Press the * button during the greeting
message, then enter the 4 digits of your
privileged access code: your machine only
starts ringing after the code has been
entered.
• If you do not answer, the caller will have
the possibility to leave a message on your
TAD, if this is in service.
✱
TU
V 8
GH
I 4