Specifications, Rfx9600 starter’s guide, Pronto serial extender starter’s guide – Philips Pronto Extensor en serie User Manual

Page 17: Remarks

Advertising
background image

Pronto Serial Extender Starter’s Guide

© Copyright 2006 Royal Philips Electronics, Interleuvenlaan 74, 3001 Leuven (Belgium)

Remarks:

All rights are reserved. Reproduction in whole or in part is prohibited without prior consent of the copyright owner.
Royal Philips Electronics is not liable for omissions or for technical or editorial errors in this manual or for damages
directly or indirectly resulting from the use of the RFX9600 Pronto Serial Extender.
The information in this user guide may be subject to change without prior notice. All brand or product names are
trademarks or registered trademarks of their respective companies or organizations.

ENGLISH

14

RFX9600 Starter’s Guide

Specifications

General

IP based Extender box for remote Pronto Control Panel operation
Dark grey metal housing for 19” rack mounting or free standing position
Up to 16 Extenders and 16 Control Panels in a system

Connectivity

5 VDC power input
4 addressable outputs for IR emitters
Ethernet RJ45 connection
4 RS232 ports for control
4 power sense inputs: 4-30 VDC or 4-30 VAC rms
4 Relay outputs: 48 VDC or 48 VAC rms, 2 A (max power 60 W)
Voltage output for general use: 5 VDC, 0.3 A

Settings

Extender ID: 16 positions
IR power output: 2 levels (normal, low)
Configuration: Use mode, configure with cross cable or via router

LED indications

3 LEDs for Power, Ethernet and Busy
4 LEDs for IR output
4 LEDs for RS232 output
4 LEDs for power sense input
4 LEDs for relay output

Dimensions/ Weight

16.9 x 9.4 x 1.8 inch (428 x 240 x 46 mm)
61.7 oz (1.75 kg)

Operating temperature

32°F to 122°F (0°C to 50°C)

Infrared (IR)

IR frequency range: 25 kHz – 1 MHz (including DC/flash codes)
IR power out: 2 levels

Accessories included

2 double high frequency IR emitters: wired in series, mini-jack connector, cable length
9 ft (2.7 meters)
2 mono mini-jack to mini-jack cables: 0.13 inch (3.5 mm), cable length 5 ft (1.5 m)
Power adapter 100-240 VAC/ 50-60 Hz (5 VDC, 2 A output, UL-CE approved
Configuration cable
Brackets for 19 inch rack mounting
Mounting material for 19 inch rack mounting
Starter’s guide
Warranty card

RFX9600_SG_ESFv3.qxd 07-09-2006 15:38 Pagina 17

Advertising
This manual is related to the following products: