Warning, Transporting and storage, Before storing your grill – Brinkmann Series 2630 User Manual

Page 12: Cleaning and maintenance, Hardware, Castings

Advertising
background image

TRANSPORTING AND STORAGE:

•

Never move a grill when it is hot or when objects are on the cooking surfaces.

•

Make sure that natural gas supply is shut off. After moving the grill check that all gas
connections are free of leaks. Refer to instructions for leak test on page 5 of this manual.

•

DO NOT store a spare LP gas cylinder (filled or empty) under or near the grill.

•

Never store flammable liquids or spray canisters under or near the grill.

•

DO NOT extinguish grease fires using water.

•

If the outdoor cooking gas appliance is not in use, the gas must be turned off at the natural
gas supply.

Follow the instructions listed below.

BEFORE STORING YOUR GRILL:

•

Ensure that the natural gas supply has been turned off.

•

Clean all surfaces.

•

Lightly coat the burners with cooking oil to prevent excess rusting.

•

If storing the grill indoors, disconnect the hose from the natural gas supply.

•

If storing the grill outdoors, cover the grill with a grill cover for protection from the weather. A grill
cover can be purchased by contacting: The Brinkmann Corporation at 1-800-527-0717.

CLEANING AND MAINTENANCE:

•

For safe grilling and peak performance of your grill, perform these checks at least twice per year or
after extended periods of storage.

HARDWARE

•

Be sure to tighten up all hardware (nuts, bolts, screws, etc.) at least twice per year.

CASTINGS

•

Remove the cooking grills, heat shields, and burners from inside your grill. Use a brush with hot water
and detergent to remove excess residue. NEVER use a commercial oven cleaner. Rinse completely
with water. Towel dry and replace all components as described in the assembly instructions.

WARNING

11

Advertising