Philips Afeitadora NIVEA FOR MEN - Manual (Page 10)

Never dry the shaving unit with a towel or tissue, as this may damage the shaving heads.
Note: The shaver is watertight and can be cleaned with water.
1 Press the on/off button to switch on the shaver.
Note: Clean the shaver while it is switched on.
2 Immerse the shaving unit/trimmer in hot water for at least 30 seconds (Fig. 24).
3 Switch off the shaver and shake off excess water.
4 Slide the protection cap onto the shaver to prevent damage (Fig. 20).
Note: If the shaver does not shave as well as it used to and you are unable to solve this with the cleaning
method described in this chapter, consult chapter ‘Troubleshooting’ for an extra-thorough cleaning
method.
maintenance
1 Lubricate the trimmer teeth with a drop of sewing machine oil every six months.
Storage
Storage
1 Store the shaver in the refill & charge station.
2 If you are going to travel or if you do not want to store the shaver in the refill & charge
station, put the protection cap on the shaver and store the shaver in the pouch (Fig. 20).
transport
If you are going to store the shaver for a longer period or if you are going to travel, it is possible to
lock the shaver. The travel lock prevents the shaver from being switched on by accident.
activating the travel lock
1 Make sure the shaver is switched off.
2 Press and hold the shaving conditioner button (1) and simultaneously press the on/off button
with your other hand (2) (Fig. 25).
3 Hold both buttons for 6 seconds. Wait until the shaver produces a brief humming sound and
the middle charging light on the shaver flashes a few times.
, The travel lock is now activated.
Note: If you accidently press the on/off button first, the shaver starts working . If this happens, press the
on/off button again to switch off the shaver.
Note: If you press the on/off button when the travel lock is activated, the middle charging light flashes
white to indicate that the shaver is locked.
Tip: Press the on/off button to check if the travel lock is activated. If the travel lock is activated, the
shaver does not go on.
Deactivating the travel lock
1 Press and hold the shaving conditioner button (1) and simultaneously press the on/off button
with your other hand (2) (Fig. 25).
2 Hold both buttons for 6 seconds. Wait until the shaver produces a brief humming sound and
the middle charging light on the shaver flashes a few times.
, The travel lock is now deactivated.
EngliSH 10