Philips Afeitadora NIVEA FOR MEN - Manual (Page 7)

- The shaver and the other accessories are not dishwasher-proof.
- Never use water hotter than 80°C to rinse the shaver.
- Only use the adapter, charger and the refill & charge station supplied.
- Do not use the refill & charge station if the adapter or the station itself is damaged.
- Do not use the shaver or the charger if it is damaged.
- If the adapter is damaged, always have it replaced with one of the original type in order to avoid
a hazard.
compliance with standards
- This shaver complies with the internationally approved safety regulations and can be safely used
in the bath or shower and cleaned under the tap (Fig. 5).
- This Philips appliance complies with all standards regarding electromagnetic fields (EMF). If
handled properly and according to the instructions in this user manual, the appliance is safe to
use based on scientific evidence available today.
general
- The adapter transforms 100-240 volts to a safe low voltage of less than 24 volts.
preparing for use
1 Remove the tab of the NIVEA FOR MEN shaving conditioner bottle (Fig. 6).
2 Turn the cap of the conditioner bottle clockwise (‘click’) (Fig. 7).
, The cap moves downwards and the conditioner nozzle appears.
3 Turn the cap of the refill & charge station anticlockwise to remove it.
4 Remove the packaging from the bottle docking hole in the refill & charge station.
5 Place the conditioner bottle in the docking hole with the nozzle pointing downwards (Fig. 8).
6 Place the cap back onto the refill & charge station (1) and turn the cap clockwise to fix it
(2) (Fig. 9).
7 Put the small plug in the socket of the refill & charge station and put the adapter in the wall
socket (Fig. 10).
8 Put the shaver in the refill & charge station and push it backwards (‘click’) (Fig. 11).
Note: The shaver is charged and filled with shaving conditioner automatically.
9 Charge the shaver for 90 minutes. (Fig. 12)
Note: Charge the shaver before you use it for the first time or when the charging light indicates that the
battery is empty (see section ‘Charge indications’).
Note: A fully charged shaver has a shaving time of up to 40 minutes.
charging by means of the charger
1 Put the small plug in the charger and put the adapter in the wall socket.
2 Put the shaver in the charger (Fig. 13).
, The shaver is being charged.
3 Charge the shaver for 1.5 hours.
Note: Charge the shaver before you use it for the first time or when the charging light indicates that the
battery is empty (see section ‘Charge indications’).
Note: A fully charged shaver has a shaving time of up to 40 minutes.
EngliSH 7