Philips BEARDTRIMMER Series 9000 barbero resistente al agua - Manual (Page 7)

- If the adapter is damaged, always have it replaced with one of the
original type in order to avoid a hazard.
- Never use compressed air, scouring pads, abrasivecleaning agents or
aggressive liquids such as petrol or acetone to clean the appliance.
- Noise level: Lc= 65dB(A)
compliance with standards
- The appliance complies with the internationally approved IEC safety
regulations and can be safely cleaned under the tap.
- This Philips appliance complies with all applicable standards and
regulations regarding exposure to electromagnetic fields.
class 1 laser product
- The product contains a class 1 laser guide which complies with
IEC60825-1.
- To avoid all risks, point the laser beam away from your eyes and do not
stare directly into the laser beam.
preparing for use
charging
Charge the appliance fully before you use it for the first time and after a
long period of disuse.
Charging takes about 60 minutes if the appliance is completely empty.
1 Make sure the appliance is switched off and the laser guide is in ‘off’
position.
2 Insert the small plug into the appliance and put the adapter in the
wall socket.
, First the bottom battery light flashes orange and white alternately.
English 7