Philips BEARDTRIMMER Series 9000 barbero resistente al agua - Manual (Page 9)

using the appliance
You can use the appliance to trim facial hair (beard, moustache and
sideburns). This appliance is not intended for trimming lower body parts or
scalp hair.
Trimming with the laser guide
You can use the laser guide to define the edges of your beard, sideburns
and moustache. The laser guide can be used with the 32mm (1.25in) side
as well as the 15mm (0.6in) side of the trimming head.
Note: The laser guide can only be used when you trim without comb.
Note: Although the light from the laser guide is not harmful to the eyes, we
advise you not to stare into the light and to avoid shining the light into your
eyes.
1 Press the on/off button to switch on the appliance.
2 To trim with the laser guide, press the top of the laser guide to
switch it on.
, The laser guide pops up and its light shines over the top of the
trimming head.
Note: If you trim with the laser guide, make sure you push the laser guide to
‘off’ position before you turn the trimming head. You may damage the laser
guide if you try to turn the trimming head while the laser guide is still
popped up.
English 9