Brother DCP-4020C User Manual
Page 210
TROUBLESHOOTING AND ROUTINE MAINTENANCE 15 - 9
STEP A: Colour block quality check
The LCD shows:
4
Check the quality of the four colour blocks on the sheet.
(BLACK/CYAN/YELLOW/MAGENTA).
5
If all lines are clear and visible, press
1
(
YES
) to go to STEP B.
—OR—
If you can see missing short lines as shown below, press
2
(
NO
).
The LCD will ask you if the print
quality is OK for each colour.
6
Press
2
(
NO
) for any colour with a
problem.
The LCD shows:
Press
1
(
YES
). The DCP will start
cleaning the colours.
7
After cleaning is finished, press
Colour Copy
. The DCP will
start printing the Print Quality Check Sheet again and then
return to STEP A.
8
If STEP A is OK, press
1
to proceed to STEP B.
OK
Poor
IS STEP “A” OK?
1.YES 2.NO
BLACK OK?
1.YES 2.NO
START CLEANING?
1.YES 2.NO