Philips HAIRCLIPPER Series 3000 cortapelos User Manual

Page 7

Advertising
background image

General

- The appliance is equipped with an automatic voltage selector and is

suitable for mains voltages from 100 to 240 volts.

- The adapter transforms 100-240 volts to a safe low voltage of less than

24 volts.

Charging

Charge the appliance fully before you use it for the first time or after a long

period of disuse.

It takes approximately 8 hours to fully charge the appliance.

When it is fully charged, the appliance has a cordless operating time of up

to 60 minutes (HC3424, HC3420) or 75 minutes (HC5440).
Note: After charging the appliance once fully for the first time, you can also

use the appliance directly from the mains. Simply connect the appliance to the

mains.
Charging indications

Charging

- When the appliance is charging, the charging light lights up green

continuously.

Charging the appliance

1

Make sure the appliance is switched off.

2

Insert the appliance plug into the appliance.

3

Put the adapter in the wall socket.

4

After charging, remove the adapter from the wall socket and pull the

appliance plug out of the appliance.

ENGLISH

7

Advertising