Philips HAIRCLIPPER Series 3000 cortapelos - Manual (Page 8)

Optimising the lifetime of the rechargeable battery
When you have charged the appliance for the first time, we advise you to
use it until the battery is completely empty. Continue to use the appliance
until the motor almost stops operating during a session. Then recharge the
battery. Follow this procedure at least twice a year.
Using the appliance
The hair length settings are indicated in millimeters, the comb cuts the hair
to a length of 1mm to 23mm. The settings correspond to the remaining
hair length after cutting.
When you trim for the first time, be careful. Do not move the trimmer
too fast. Make smooth and gentle movements.
Tip: Start trimming at a high length setting and reduce the length setting
gradually until you have reached the desired hair length.
Trimming with comb
1 Attach the comb onto the appliance.
2 Turn the length setting adjuster to the desired length setting.
Note: When you trim for the first time, start at the highest length setting to
familiarise yourself with the appliance.
3 Switch on the appliance.
ENGLISH
8