BT STUDIO 1500 - Manual (Page 53)

BT Studio 1500 – Edition 3 – 27.07.04 – 5876
IMPORTANT
You can only register your BT
Studio 1500 handset to another
base if it is GAP compatible.
You will not be able to register
your BT Studio 1500 handset to a
BT Studio or BT Studio 500 base
as these products are not GAP
compatible.
The default PIN code is 0000.
Your BT Studio 1500 handset can be registered to up to
4 other bases.
Registering your BT Studio 1500 handset to
another base
On the handset:
1. Press .
2. Press or until REGISTER is displayed then
press .
3. Press or until REG BASE is displayed then
press .
4. BASE 1 2 3 4 will be displayed.
The base that you are currently registered to will flash.
5. Enter the number of the base you want to register to.
SEARCH 1 is displayed (where 1 is the base number you
are searching for).
When the base is located, you will hear a confirmation
tone and
PIN? will be displayed.
6. Enter the base PIN code and press .
You hear a tone to confirm you have entered the correct
code and the handset returns to idle mode.
Menu
Menu
Vol
Menu
Vol
Menu
Using additional bases
53