Bose 3.2.1 GS Series II - Manual (Page 13)

13
System Setup
Engl
is
h
2. At the other end of the speaker cable, separate the left and right speaker cords as much
as necessary to reach each speaker (Figure 8).
Figure 8
Separating left and right
speaker cords
3. Plug the LEFT speaker cable into the rear jack of the left speaker (Figure 9). Plug the
RIGHT speaker cable into the rear jack on the right speaker.
Figure 9
Left and right speaker
connections
Note: Make sure cable connectors are fully inserted and seated firmly in the speaker jacks.
Note: If you purchased a 3•2•1
GS Series II system, the left and
right speaker cable connectors
will be marked with a “GS”.
RIGHT LEFT
RIGHT
speaker
cable
LEFT
speaker
cable