Bose 3.2.1 GS Series II - Manual (Page 34)

34
Operation
E
n
glis
h
Erasing a preset
1. Tune to the preset station.
2. Press and hold the 0 button on the remote until the media center display tells you that
the preset is erased.
Playing other sources
Turn on any component connected to the media center by using the remote for that compo-
nent or controls on the component front panel. Use the 3•2•1 Series II or 3•2•1 GS Series II
system remote to get started:
• Pressing TV, CBL-SAT, or AUX on the 3•2•1 or 3•2•1 GS system remote turns on the
system and selects the audio for that component. Be sure a tape or disc is loaded, as
needed.
• Use the Volume up or down arrows on the system remote or on the media center to raise
or lower the volume of the system.
Using the sleep timer
Your system includes a sleep timer which can be set to turn your system off automatically
after 1 to 90 minutes of listening to any source. This timer can be accessed through the
Settings menu for any source. See “Changing Source Settings” on page 39.
Note: The sleep timer will not turn off the TV or other audio device.