BMW Universal BluetoothHands-Free System (ULF) User Manual
Page 11
Universal Bluetooth
TM
Hands-Free System (ULF)
11
11. Enter the password (= ULF passkey) located on ULF Control Module that is
in the rear of the vehicle or on the Passkey Reference Card.
•
Mobile phone display shows ‘BMW …… Pairing’
•
Mobile phone display shows ‘Pairing Successful’
•
Display screen shows ‘Pairing succeeded’ for 3 seconds
12. Enter device name or accept the name that is automatically displayed.
13. Mobile phone display shows “Added to paired devices”.
14. Exit menu by pressing the red phone/NO button.
15. Once the phone is successfully paired to the device cycle the ignition
switch off and back on.
16. The devices should wirelessly
connect within 30 seconds.
The connection is established
when the phone displays the
symbols indicated, on the right
side of the screen.
Note
: Shortly after turning on the ignition and the Bluetooth
TM
connection is
identified, the phone may display a message asking if the connection should be
established/accepted. The connection authorization request will always occur
unless the setting on the phone is modified to allow automatic connection
every time, please refer to the user’s manual of the phone to determine how to
change this setting.