BMW Universal BluetoothHands-Free System (ULF) - Manual (Page 16)

Universal Bluetooth
TM
Hands-Free System (ULF)
16
the connections menu or selecting a transfer function in the settings menu
of the phone (refer to the user’s manual of the phone for more information).
Linking Several Bluetooth TM Mobile Phones
Up to four Bluetooth TM mobile phones can be paired one after the other to the
ULF control module. The pairing operation corresponds to the procedure
described above.
The handset paired last has the highest priority. The telephone paired first will
drop out of the list if a fifth Bluetooth TM mobile phone is paired.
Note: For incoming and outgoing calls, only the user connected first to the
system can speak via the hands-free facility.
If two users enter the network or connection range simultaneously, only the user
with the highest priority (the user last paired during the initial pairing procedure)
will be able to use the hands-free function for incoming & outgoing calls. If the
highest priority phone is turned off the phone with the next highest priority will be
connected.
Deleting Devices
The paired Bluetooth TM mobile phones can only be deleted as a single group
from the ULF control module.
The pairing procedure must first be activated, and then the send/receive
button on the installed eject-box or the pairing button located at the rear of the
center console must again be depressed for an additional 10 seconds after the
“Bluetooth Pairing” message is displayed on the radio in order to clear the list of
paired devices from the control module and the message “paired devices
deleted” is displayed.