Brother WL660 User Manual
Page 23
CHAPTER 2 PAPER HANDLING
2–5
English
Loading Paper into the Feeder
To load paper into the feeder, follow these steps.
1. Open the multi-purpose sheet feeder. ( ➀ )
2. Load paper into the multi-purpose sheet feeder with the printing
surface face down. ( ➁ )
☛ Caution
•
The feeder can hold up to 200 sheets of plain paper. If you load too
many sheets, paper jams might occur.
•
Make sure that the paper is stacked below the ▼ mark.
•
If there is still some paper in the feeder, you must first remove it, put
it together with the new paper and then insert the stack into the feeder.
Fig. 2-4 Opening the Feeder and
Loading Paper or Envelopes
✒ Note
If you load envelopes in the feeder, make sure they are inserted in the
direction shown above with the flap on the left side.