Charging your nüvi, Additional maps – BMW Navigation Portable Pro User Manual
Page 45
BMW Navigation Portable Pro Owner’s Manual
Appendix
battery. To increase the accuracy of the
battery gauge, fully discharge the battery
and then fully charge it. Do not unplug the
nüvi until it is totally charged.
You can also use the Suspend/Resume
mode to put your nüvi in “sleep” mode
and to quickly wake it up. With your nüvi
powered on, slide the Power key to the left.
Operation is suspended. Slide the Power
key to the left again to resume operation.
To completely turn off your nüvi, remove
the battery.
Replacing the Battery in the
nüvi
If you need to replace the battery in the
nüvi, use a Garmin lithium-ion battery
010-10987-03. Purchase a replacement
battery at
your local waste disposal department for
information about properly disposing of the
battery.
Replacing the Battery in the
Remote Control
The remote control contains a user-
replaceable CR2032 battery.
1. Use a coin to twist the cover
counterclockwise until it is open.
2. Insert the round, lithium CR2032 coin
battery into the
remote control with
the positive side
facing up.
3. Align the arrow on
the battery cover
with the arrow on the outer edge of the
remote control.
4. Use a coin to twist the cover clockwise
until it is closed.
NoTe: Contact your local waste
disposal department to properly dispose
of batteries.
Perchlorate Material
Replaceable coin-cell batteries can contain
perchlorate material. Special handling
could apply
Charging Your nüvi
Use the vehicle power cable.
Use the USB cable.
Use an optional AC adapter cable.
Additional Maps
You can purchase additional MapSource
map data from Garmin and load the maps
in your nüvi internal memory or on an
optional microSD card.
To determine the versions of the maps that
are loaded on your nüvi, open the Menu
page. Touch
Tools
>
Settings
>
Map
>
Map info
your map software is available. To enable
•
•
•
Battery
cover
Battery