Installing the battery, Mounting the nüvi, Removing the nüvi from the cradle – BMW Navigation Portable Pro User Manual

Page 8: Mounting the speech recognition remote control, Removing the nüvi from, The cradle, Mounting the speech, Recognition remote control

Advertising
background image



BMW Navigation Portable Pro Owner’s Manual

Getting Started

Installing the Battery

WarNiNG: This product contains a

lithium-ion battery. To prevent damage,

remove the unit from the vehicle or store

it out of direct sunlight.

1. Locate the rectangular lithium-ion

battery that came in the product box.

2. Slide the battery cover off the back of

the nüvi.

3. Locate

the metal

contacts on

the end of the

lithium-ion battery.

4. Insert the battery so that the metal

contacts on the battery match up with

the metal contacts inside the battery

compartment.

5. Press the battery down into place.
6. Slide the battery cover back on until it

clicks into place.

Mounting the nüvi

1. Fit the bottom of your nüvi into the

cradle.

2. Tilt the nüvi back until it snaps into

place.

Removing the nüvi from

the cradle

1. Press the small tab on the bottom of the

cradle up.

2. Tilt the nüvi forward.
3. Snap the protective cover on to the

cradle when it is not in use.

Cradle

Cover

Tab

Mounting the Speech

Recognition Remote

Control

Pull the clear tab out of the remote control

to activate it.

Advertising