Philips Lumea Comfort Sistema de eliminación de vello IPL - Manual (Page 19)

4 Press the on/off/intensity button one or more
times to choose the intensity level suitable for the
treatment area and your skin colour.
5 Make sure that the treatment area is clean, dry
and properly shaved. Place the skin contact surface
on the skin. When the skin contact surface is in
full contact with the skin, the READY/skin colour
warning light starts blinking slowly.
6 Press the flash button. The skin colour sensor checks
the colour of your skin. If the skin colour allows safe
treatment, the READY/skin colour warning light goes
off. The appliance delivers a flash to the skin and
makes a soft popping sound.
Note: If the appliance releases no flash and the READY/skin
colour warning light blinks rapidly, your skin colour is too dark
for safe treatment. If you have recently tanned skin, wait for
2 weeks (see chapter ‘Contraindications, precautions and
warnings’, section ‘Warning about sun exposure and tanning’).
7 The appliance immediately recharges for the next flash.
Depending on the intensity level selected, the READY/
skin colour warning light comes on after a few seconds.
This indicates that the appliance is ready for the next
flash. Choose one of the flash delivery methods and
continue to treat the areas you want to treat.
Note: If the treatment becomes painful at any point in time,
reduce the intensity level until the treatment is comfortable
again. If you notice skin reactions stronger than slight redness,
stop the treatment immediately and read chapter ‘Possible
side effects’.
90º
ENGLISH 19