Philips Lumea Comfort Sistema de eliminación de vello IPL - Manual (Page 25)

Problem Possible
cause
Solution
I have pressed
the on/off/inten-
sity button, but
the appliance
does not switch
on.
You have not
plugged in
the appliance
properly.
Make sure that you insert the small plug into
the appliance socket properly. Check if you
have inserted the adapter into a live wall
socket properly.
The appliance
does not emit
a flash when I
press the flash
button.
Your skin
colour is not
suitable for
treatment
with this
appliance.
The READY/skin colour warning light blinks
rapidly. This indicates that the skin colour sen-
sor measured a skin colour that is too dark
for safe treatment. You can try the appliance
on a different area where the skin is lighter.
If your dark skin colour is due to recent
sunbathing or tanning, wait for 2 weeks and
then try again. If the dark skin colour is your
natural colour, please check the table in chap-
ter ‘Preparing for use’, section ‘Skin colour
and light intensity’ to see if the appliance is
suitable for you at all.
The READY/
skin colour
warning light
continues
to light up
steadily.
Make sure that the skin contact surface is
in full contact with the skin. When it is, the
READY/skin colour warning light starts blink-
ing slowly and you can press the flash button
to release a flash.
The READY/
skin colour
warning light
and the in-
tensity lights
are all on.
The appliance has a system error. Switch off
the appliance, unplug it and then try to switch
it on again. If the problem persists, visit
www.philips.com/support or contact the
Philips Consumer Care Centre.
I experience
unacceptable
skin discomfort
when I use the
appliance.
You did not
shave the
treatment
areas.
Shave the treatment areas before you use
the appliance. If shaving causes skin irritation,
trim hairs as short as possible and use the
appliance at a comfortable setting.
ENGLISH 25