Brinkmann ProSeries 4415 - Manual (Page 25)

Step 4
Attach locking casters to the bottom
of the left side cart panel. Tighten
caster bolts securely using hex nut
wrench provided in parts card.
Note: With the help of a friend,
turn the cart to its upright
position. Lock the casters to
stabilize the grill before
performing Step 5.
Step 5
Install door bracket using the four
M6 X 50mm bolts. Make sure door
stop is set toward front of cart.
Note: Leave bolts hand tight until
Step 9.
Step 6
Attach the tank block bar onto the
base panel and back panel using
two M6 X 12mm bolt.
24
Locking Caster
Hex Nut Wrench