Brinkmann ProSeries 4415 - Manual (Page 28)

Step 13
To attach side burner assembly to
right side of grill body, insert four
M6 X 15mm bolts halfway into grill
body.
Step 14
Place side burner keyholes over
bolts and slide toward bottom of
grill, then tighten securely. Fasten
side burner front panel to grill body
with two M4 X 10mm bolts and two
M4 washers.
Step 15
Remove two bolts and spring
washers from the side burner valve.
Insert the side burner valve stem
through the hole in the side burner
table base, then firmly seat
the valve nozzle into the burner
venturi. Hold in place while you
perform Step 16.
Warning: Never use your grill
without leak testing all
gas connections and
hoses. See the section
on "Leak Testing" in this
manual for proper
procedures.
27
Side
Burner
Valve
Burner Venturi
Valve
Nozzle