Philips Mando a distancia universal - Manual (Page 4)

Contents
1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2. Installing the remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-7
Replacing the batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Testing the remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Setting the remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-7
3. Keys and functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
4. Extra possibilities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-10
Learn a key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Adjusting device selection (Mode-selector) . . . . . . . . . . . . . . . . . . . . . . . 10
Adding a remote control function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Assigning the volume control to another mode . . . . . . . . . . . . . . . . 10-11
Restoring the original remote control settings . . . . . . . . . . . . . . . . . . . . 11
5. Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
6. Need help? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Code list of all brands/equipment . . . . . . . . . . . . . . . . . . . . . . . . . . 103-126
Information to the consumer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128
1. Introduction
Congratulations on your purchase of the Philips SRU 7040 universal remote
control. After installing the remote control you can operate a maximum of
4 different devices with it:TV, DVD player/recorder or video recorder,
STB (settop box, satellite or cable decoder) and amplifier/receiver.You can
find information about how to prepare this remote control for use in the
chapter ‘Installing the remote control’.
2. Installing the remote control
•
Batteries are already placed in the battery compartment of the
SRU 7040. Just remove the protective foil from the batteries and the
SRU 7040 is ready for use.
•
If the indicator LEDs (TV, DVD/VCR, STB and AMP) blink four times
after every key press, the remote control is indicating that its batteries
are running low. Replace the old batteries with new CR2025 Lithium
batteries. See ‘Replacing the batteries’.
Replacing the batteries
1
Press the edge of the battery compartment
as shown. Keep the edge pressed and slide
the compartment outwards.
2
Place two new CR2025 Lithium batteries
into the battery compartment, as shown.
Make sure to place the text side of the
batteries upwards.
3
Slide the compartment back and click it firmly
into place.
4
Instructions for use
English