Philips Solárium facial - Manual (Page 8)

Duration of the
tanning session in
minutes
for persons with very
sensitive skin
for persons with
normal sensitive skin
for persons with less
sensitive skin
2nd session 10-15 20-25 30-40
3rd session 10-15 20-25 30-40
4th session 10-15 20-25 30-40
5th session 10-15 20-25 30-40
6th session 10-15 20-25 30-40
7th session 10-15 20-25 30-40
8th session 10-15 20-25 30-40
9th session 10-15 20-25 30-40
10th session 10-15 20-25 30-40
using the appliance
1 Place the appliance on a solid, flat and stable surface.
The appliance can be placed in two positions: upright and tilted. (Fig. 1)
 Put the plug in the wall socket.
 Consult the table in these instructions for use to determine the appropriate duration of the
session.
4 Put on the protective goggles supplied.
5 Set the timer to the appropriate tanning time. (Fig. )
6 Position yourself in front of the face tanner.
The distance between your face and the tanning lamps should be 10 cm. (Fig. )
When the set time has elapsed, the timer will automatically switch off the appliance.
 Always unplug the appliance after use.
8 Keep track of the overall number of sessions you have had on a piece of paper or by means
of the memory knobs (type HB15 only).
protective goggles
The protective goggles should only be used when tanning with a Philips tanning appliance. They
should not be used for other purposes.
The protective goggles comply with protection class II according to directive 89/686/EEC.
cleaning
Always unplug the appliance and let it cool down before cleaning it.
You can clean the outside of the appliance with a damp cloth. Make sure that no water runs
into the appliance.
Never use scouring pads and abrasive liquids such as scouring agents, petrol or acetone to clean
the appliance.
1 Clean the protective goggles with a moist cloth.
,
,
,
EnglisH 8