Brother DCP 8060 - Manual (Page 34)

Chapter 4
22
Setting up the Public user
4
You can set up the Public user. Public users
do not need to enter a password.
Note
You must disable at least one function.
a
Press Menu, 1, 7.
17.Function Lock
a Lock Off iOn
Set Password
b Setup User
Select ab & OK
b
Press a or b to select Setup User.
Press OK.
c
Enter the administrator password.
Press OK.
17.Function Lock
Setup User
a Public
b User01
Select ab & OK
d
Press a or b to select Public.
Press OK.
e
Press a or b to select Enable or
Disable
for Copy. Press OK.
After you have set Copy, repeat this step
for Scan and PCprint
1
. Press OK.
1 You can set PCprint for only the Public user.
f
Press Stop/Exit.
Setting up restricted users
4
You can set up users with restrictions and a
password.
a
Press Menu, 1, 7.
17.Function Lock
a Lock Off iOn
Set Password
b Setup User
Select ab & OK
b
Press a or b to select Setup User.
Press OK.
c
Enter the administrator password.
Press OK.
17.Function Lock
Setup User
a Public
b User01
Select ab & OK
d
Press a or b to select User01.
Press OK.
e
Use the dial pad to enter the user name.
(See Entering Text on page 89.)
Press OK.
f
Enter a four-digit password for the user.
Press OK.
g
Press a or b to select Enable or
Disable
for Copy. Press OK.
After you have set Copy, repeat this step
for Scan. Press OK.
h
Repeat d to g for entering each
additional user and password.
i
Press Stop/Exit.