Philips Mando a distancia universal - Manual (Page 8)

3. Keys and functions
The illustration on page 3 gives an overview of all keys and their functions.
1 y Standby . . . . . . . . switches TV, SAT, DVD,VCR or AMP on or off.
2 Indicator LEDs
3
- teletext on/off (disc menu)
- text off
- index
- play (VCR/DVD)
- text hold
- record (VCR/DVD)
- wide screen TV
- red teletext key
- rewind (VCR/DVD)
- green teletext key
- stop (VCR/DVD)
- yellow teletext key
- pause (VCR/DVD)
- blue teletext key
- wind (VCR/DVD)
4 MENU . . . . . . . . . . . turns the menu on and off.
5 Cursor keys . . . . . . cursor up, down, left, right in a menu.
6 AV . . . . . . . . . . . . . . . switches between external inputs of your
equipment.
7 INFO . . . . . . . . . . . . turns menu info on and off.
8 - VOL +. . . . . . . . . . . adjusts the TV or AMP volume.
9 Digit keys . . . . . . . . - direct choice of channels and other functions.
- source selection keys in amplifier mode
(together with SHIFT).
Try out other combinations with the Shift-key on your device in order to find
out which functions are available.
Only functions featured on the original remote control are available.
0 SHIFT . . . . . . . . . . . for extra functions. When pressed at the same
time as a second key, the second key will get
another function. For example:
SHIFT + . . . . . . installs your TV.
SHIFT + . . . . . . stores TV settings.
! / . . . . . . . . . . . . . . . selects between one- and two-figure channel
numbers.
@ 2 2 / SURROUND . selects previous programme/channel.
selects surround modes.
# - PROG + . . . . . . . . selects a previous or following channel.
$ s . . . . . . . . . . . . . . . . mutes the sound of the TV or DVD.
% OK. . . . . . . . . . . . . . . confirms your selection.
^ BACK . . . . . . . . . . . . jumps back one level in the menu or turns off the
menu.
& SELECT. . . . . . . . . . selects TV,VCR/DVD, SAT or AMP mode.
If you use the (fi) 'memory off' key to get to the next teletext page on your
Philips TV, you can press the Subtitle key for this. See also ‘Troubleshooting’.
If the device does not respond at all, or not to all of the key
commands, follow the instructions under ‘Setting the remote control’.
It is possible that you must enter another code for the device.
8
Instructions for use
English
SRU740_10_v2.qxd 26-04-2005 15:19 Pagina 8