Bissell 6590 - Manual (Page 13)

13
BISSELL Consumer Services
For information about repairs or replacement
parts, or questions about your warranty, call:
BISSELL Consumer Services
1-800-237-7691
Monday - Friday 8 a.m. — 10 p.m. ET
Saturday 9 a.m. — 8 p.m. ET
Or write:
BISSELL Homecare, Inc.
PO Box 3606
Grand Rapids, MI 49501
ATTN: Consumer Services
Or visit the BISSELL website - www.bissell.com
When contacting BISSELL, have model number of unit available.
Please record your Model Number: ___________________
Please record your Purchase Date: ___________________
NOTE: Please keep your original sales receipt. It is your warranty.
Suction
Inlet
Air Passageway
Low suction or poor pickup may be due to a clog in
the vacuum cleaner. If you notice a change in the
sound of the motor or a reduction in the spinning
action, check for clogs.
Unplug cleaner from electrical outlet.
Empty Dirt Container.
Check Upper Tank for build up or clogs.
Remove the Upper Tank and check the suction inlet for a clog.
Grasp the Quick Reach Handle and lift Hose Wand to separate
from the suction opening. Check for a clog in the Base, the
Wand or the Hose.
For Models with the Twist ‘n Snap Hose
Release the hose from the vacuum by turning to
the left. Straighten the hose and unclog with a long,
narrow object.
Remove the screw attaching the Hose Wand Base to the
vacuum. Straighten the Hose Wand Base and unclog with
long, narrow object.
If the clog persists, follow the instructions for Checking
the Rotating Floor Brush on page 12 and inspect the Air
Passageway for obstructions.
Clearing Clogs
4.
5.
6.
7.
1.
2.
3.
Hose Wand
Base