Philips SHAVER Series 9000 afeitadora eléctrica en mojado y seco - Manual (Page 32)

4 Remove the shavings heads from the shaving
head holder and throw them away.
5 Place new shaving heads in the holder.
Note: Make sure the projections of the shaving heads
fit exactly into the recesses.
6 Place the retaining ring holder on the retaining
ring (1), place it on the shaving head (2) and
turn it clockwise (3) to reattach the retaining
ring.
Repeat this process for the other retaining rings.
7 Reattach the shaving head holder to the
bottom part of the shaving unit.
8 To reset the shaver, press and hold the on/off
button for approx. 7 seconds. Wait until you
hear two beeps.
Ordering accessories
To buy accessories or spare parts, visit
www.shop.philips.com/service. or go to
your Philips dealer. You can also contact the Philips
Consumer Care Centre in your country (see the
worldwide guarantee leaflet for contact details).
The following parts are available:
- HQ8505 adapter
- SH90 Philips shaving heads
ENGLISH 32