Philips SHAVER Series 9000 afeitadora eléctrica en mojado y seco - Manual (Page 36)

Problem Possible cause Solution
A shaving
head symbol
has suddenly
appeared on the
display.
This symbol is a
replacement reminder.
Replace the shaving heads
(see chapter ‘Replacement’).
An exclamation
mark has
suddenly
appeared on
the display while
charging.
The shaver is
overheated.
Disconnect the shaver
from the mains for approx.
10 minutes.
An exclamation
mark,
replacement
reminder and
the cleaning
reminder
have suddenly
appeared on the
display.
The shaving heads are
soiled or damaged.
Replace (see chapter
‘Replacement’) or clean the
shaving heads (see chapter
‘Cleaning and maintenance’).
Water is leaking
from the
bottom of the
shaver.
During cleaning, water
may collect between
the inner body and
the outer shell of the
shaver.
This is normal and not
dangerous because all
electronics are enclosed in
a sealed power unit inside
the shaver.
The SmartClean
system does not
work when I
press the on/off
button.
The SmartClean
system is not
connected to the
mains.
Put the small plug in
SmartClean system and
put the adapter in the wall
socket.
ENGLISH 36